Let me know if you need any further assistance. This can be done using Word Clock, or you can setup a LoopSync between your other HD devices and the H9000’s Pro Tools expansion card. You will need to configure the clocking on all of your devices for this to work correctly. You would also need to set the PT|HD card to be in 16-channel mode. The Secondary port of the 1st HD device would connect to the Primary port of the expansion card to set up the daisy chain, or vice-versa if you wanted the H9000 to be the 1st device. If you already have 2 devices connected to your system, then you can choose to only use 16 inputs on one of the devices and have the H9000 daisy chained to this device, but this would limit you to only having 16 channels of I/O on your H9000’s Pro Tools expansion card. With 1 HDX card your total I/O is 64 channels, 32 channels per DigiLink port. All of the I/O is configured with your FX Chains, so a simple example would be using AES 1+2 for FX Chain 1, and PT|HD 1+2 for FX Chain 2, but these can be configured however you like. On the H9000, you can use all of the I/O from your analog, digital, USB, and expansion cards simultaneously, so there is no issue with using your AES and Pro Tools expansion card I/O at the same time. Glad to hear that you were able to get this working, I’m not sure what the issue you were having was. What about Clocking? I am using a dedicated Word Clock…so imagine I may conect one WC Cable to the in of the h9000…Īny tips or considerations I should be aware of? So with 1 Avid Pro Tools HDX card I am limit to 64 channels of DigiLink I/O right? so I have to fit the H9000 i/o into this right? and I can use 16/32 i/0 thru the H9000 Pro tools expansion card and the most solid way to integrate the h9000 with my Pro Tools Rig? So with I/O are working when using the Pro Tools Expasion Card with the H9000? I am reading the new manual but I did not find what i/0 are possible to use while using the Pro Tools Expansion Card.Īlso what would be the best way to integrate the Digi Link connection if I have 2 AVID Interfaces that each are connected to each port of the Pro Tools HDX Card ( Mac computer)…how should be the connections with Primary and secondary…. So Basically what limitations are when using the card in terms of I/O?įor example I have now a H9000 session where I have the unit all coming back to Pro Tools only with AES i/o (not Expansion card Connected to the System)….when I allow/connect the HDX expansion Card I can not receive any of the AES Routing I had, but when stop using the Pro Tools HDX Expansion Card all goes back to normal. I want to know when using the Eventide H9000 with his Pro Tools HDX expansion Card if that limit the use or any I/O analog, AES I/O etc of The H9000. You can also monitor and mix 7.1.4 Dolby Atmos in a fully calibrated system.I need some help and clear vision how to maximize and Integrate the H9000 with my Pro Tools HDX Rig (1 HDX Card) Thanks for the powerful and flexible interface of the MTRX you can easily grow your system and route any audio to any channels regardless of connectivity formats. Record and mix thousand of tracks and plug-ins in real-time with near-zero latency (0.7ms). This translates into a powerful system capable of handling some of the most complex sessions with complete confidence. With its Pro Tools HDX card, this system features some of the industry’s most powerful DSP platform with no less than 18 FGPA chips developed by Texas Instruments and up to 6.3GHz aggregate processing. This setup offers superior performance, DSP power and the scalability required by the most demanding music and post-production facilities. This powerful combination gives you real-time mixing and processing of the HDX environment, flexible routing with the ability to monitor 7.1.4 Dolby Atmos, 64 channels of audio over IP via Dante Network and the ability to record on the industry-standard Pro Tools Ultimate. The Avid Pro Tools | HDX Thunderbolt 3 MTRX Studio Desktop System comprises of a Pro Tools HDX card housed in the Avid Pro Tools HDX Thunderbolt 3 Rack Chassis, the AVID MTRX Studio AD/DA Converter and Pro Tools Ultimate with one year support and upgrades. Includes a Pro Tools HDX Card, a Pro Tools HDX Thunderbolt 3 Rack Chassis, Pro Tools MTRX Interface and Pro Tools Ultimate with one year support and upgrades. The Avid Pro Tools HDX Thunderbolt 3 MTRX Studio Desktop System is a powerful recording system for music or post-production that can be connected to any Thunderbolt-equipped Mac or Windows PC. Avid Pro Tools HDX Thunderbolt 3 MTRX Studio Desktop System
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |